Air Operated Drum Top High Power

CECOR SA5-DT

SA5-DT is a wet vac drum top with a high suction lift. It fits onto a standard 55-gallon drum and will suction sludge & fluid from your CNC sump or pit.

The SA5-DT uses the same air venturi system we use on its big brother, the air powered Sump Shark®. This suction system can create a suction lift of up to 26” hg (mercury). This is equivalent to pulling water through a column 350” (9 meters) deep. You may have to tone it down a little to make sure your 55-gallon drum does not implode. The CECOR’s 55-gallon drum (TX-55PL) can handle the power of the SA5-DT drum top. Moving up to 70 gallons of fluid & sludge per minute with a 1-1/2” suction hose into a 55-gallon drum speeds up the sump cleaning process.

This drum top wet vac conveniently works on in plant air. You will need 1/2” air service with line pressure of 75 to 120 PSI (pounds per square inch) to get this type of performance.

The Right Tool

Hose Box Options

CECOR sump cleaners are equipped to manage either a 1-½” or 2” suction/dispensing hose. The 1-½” hose option is particularly user-friendly, easing the handling process due to its optimal size. Thanks to the high suction speed of both hose options, 90% of our customers prefer the 1-½” hose for its superior balance of performance and value.

In Plant Air Power Requirements

** A ½” air connection to the sump cleaner will achieve higher performance. **

Better design

The Sump Shark® Drum Top surpasses traditional methods such as the shop-vac, bucket, and shovel. Featuring the CECOR SA5-DT, convenience takes center stage with its plug & play design. All you need to do is plug the air connection into the sump cleaner, open the valve, and start working. CECOR's powerful suction capabilities are robust enough to crush weaker 55-gallon drums, highlighting its remarkable strength and efficiency.

Monitor the Process

The Sump Cleaner Drum Top comes with a pressure gauge that shows the level of performance the Sump Shark® Drum Top is delivering.