DISCLAIMER: FINAL SHIPPING CHARGES WILL BE CALCULATED AT TIME OF SHIPPING.
Drum Top Sump Sucker
Couldn't load pickup availability
CECOR SA3-DT
SA3-DT is a wet vac drum top with a high suction lift. It fits onto a standard 55-gallon drum and will suction sludge & fluid from your CNC sump or pit.
The SA3-DT is the starting point of our wet vac drum top units. It uses an air venturi system to create a suction lift of up to 12 hg (mercury). This is equivalent to pulling water through a column 163″ (4 meters) deep. It will suction most sludge & fluid from your CNC sump at up to 40 gallons per minute into a 55-gallon drum. This unit will definitely speed up the sump cleaning process.
This drum top wet vac conveniently works on in plant air. You will need 1/2” air service with line pressure of 75 to 120 PSI (pounds per square inch) to get the most out of this unit.
When you purchase a SA3-DT, it includes the following:
Series: | SA3-DT |
Power | |
Pump: | Air-operated venturi |
Suction Lift: | 12 hg or 163" | (4 meters) water |
Air Recommendations | |
Minimum Air Run Size: | 3/4" | (1.905 cm) or greater |
Minimum Vertical Drops: | 1/2" | (1.27 cm) or greater |
Minimum Line Pressure: | 75 to 120 PSI |
Minimum Volumetric Capacity: | 53 to 80 CFM |
Minimum Air line to Sump Cleaner: | 3/8" | (.9525 cm) |
Suggested Air line to Sump Cleaner: | 1/2" | (1.27 cm) |
Suction Hose Specs | |
Material: | Oil resistant PVS |
Connections: | Quick Disconnect Coupler |
Standard Hose | |
Inches: | 1-1/2" ID x 16' |
Meters: | 3.81 cm ID x 4.8768 m |
Suction Speed | |
Suction Speed w/ 1-1/2" Hose: | 40 gpm | (151 lpm) |
Additional Specs | |
Cleaning Tools: | Straight Nozzle, Flexible Nozzle, & Flared Nozzle |
Overfill Prevention: | Yes |
Pressure Gauge: | Yes |
Ability to Pick up Puddles: | Yes |
Shipping: | UPS |
Model: SA3-DT |
||
Operations Manual | ||